|Glen Burnie, MD||
The City of Glen Burnie is home to an estimated 68,768 residents, and it’s located in Anne Arundel County, MD.
This report will help you become better acquainted with Glen Burnie and the surrounding area by addressing the following questions:
Hazardous Sites near Glen Burnie, MD
There are two Superfund sites in Anne Arundel County, MD. Superfund sites, like Fort George G. Meade in Odenton, MD, are areas that have been contaminated with hazardous substances. If not for the cleanup efforts orchestrated by the EPA, these sites could endanger people living in nearby communities.
The EPA uses the Hazardous Ranking System (HRS) to quantify the risk a contaminated site poses to human health and the environment. Sites assigned HRS scores of 28.5 or greater qualify for placement on the National Priorities List (NPL), and are eligible to receive federal funding for cleanup efforts.
Before the EPA deletes a site from the NPL, it conducts reviews to ensure the cleanup was sufficient. As a result, some sites remain on the active site list long after cleanup activities are complete.
For more information about the Superfund sites located in the Glen Burnie, MD area, be sure to review the map and background information provided below:
Air Quality in the Glen Burnie, MD Area
The two most widespread forms of air pollution are ozone (smog) and particle pollution (soot). Exposure to these harmful pollutants, for even just a short period, can have adverse effects on your health.
Thanks to data collected by air monitoring equipment located across the country, the American Lung Association (ALA) is able to assess and track our air quality using three metrics:
In their 2019 annual report, the ALA rated the air quality in Anne Arundel County, MD as follows:
Grading Scale: A-F
Grading Scale: A-F
Grading Scale: Pass/Fail
DNC (Data Not Collected): Data on associated pollutants were not collected in this county or county equivalent.INC (Incomplete): Associated pollutants are being monitored in this county or county equivalent, but data were insufficient to assign a grade.
Radon Levels in Glen Burnie, MD Area
Air quality inside your home can be impacted by a number of factors, including the presence of hazardous substances in building materials (asbestos, lead, formaldehyde, etc.) and local radon levels.
Radon is a naturally occurring gas you cannot see or smell. It can build up inside your home and negatively impact your indoor air quality as well as your health.
To provide a guideline, the EPA assigned one of three zones to each U.S. county and county equivalent:
Indoor radon readings in Anne Arundel County, MD are expected to average from 2 to 4 picocuries per liter (pCi/L), so the county has been assigned EPA Radon Zone 2.
EPA Radon Zone
According to the EPA, you should consider acting to reduce your home's radon level if it measures between 2 and 4 pCi/L, so if you're contemplating buying a home in Glen Burnie, MD, you should have a radon test performed.
Water Quality in Glen Burnie, MD Area
In accordance with the Safe Drinking Water Act (SDWA), the EPA sets regulatory limits for drinking water contaminants known to cause adverse health effects.
The following Anne Arundel County, MD water provider(s) violated the maximum allowable level for one or more regulated contaminants:
In addition to setting enforceable standards for harmful contaminants, the EPA also established guidelines to assist public water providers in managing the taste, odor and color of their drinking water.
To find out more about what’s in your drinking water, contact your utility company and request a copy of the latest Consumer Confidence Report.
Sources and Methods
Hazardous Sites: Identified using a report from the Environmental Protection Agency (EPA), hazardous sites detailed on trendingtowns.com represent sites contained on the National Priorities List (NPL) as of November 25, 2019. The NPL is the list of national priorities among the known releases or threatened releases of hazardous substances, pollutants, or contaminants throughout the United States and its territories. All site-related data was sourced from the EPA.
Air Quality: Grades for ozone, short-term particle pollution, and year-round particle pollution were obtained from State of the Air 2019, a report compiled by the American Lung Association.
Radon Zones: Radon zone designations were obtained using a public use dataset provided by the EPA (September 11, 2019).
Water Quality: Drinking water violation data was sourced from the Safe Drinking Water Information System (SDWIS), a public use database provided by the EPA. The dataset included violations submitted to the database as of the third quarter of 2019.
After reviewing our local water quality report, and finding out which contaminants our tap water might contain, I set out to find the right water filter for my family. I did some careful research and...
Today, I’ll continue my review of some of the more common drinking water contaminants with a look at Uranium. I’ll touch on how Uranium can affect water quality and share information on...